To choose a good tailgate, you must first determine the type of tailgate according to the specific purpose of the vehicle and the type of cargo to be transported; the lifting capacity and plate size of the tailgate are determined by the weight and volume of the cargo loaded and unloaded at one time and the cross-sectional size of the compartment ;According to the main technical parameters of the vehicle, specifically determine the model of the tailgate and whether to install bumpers and other accessories; at the same time, consider the price factor and choose a product with high cost performance. So do you know how the car tailgate is installed?
1. The rear of the car does not need to be a pedal. The taillights of trucks with a load of more than 3 tons should be flat.
2. The upper end of the car taillight should be at least 250mm lower than the car floor.
3. The taillights of trucks under 3 tons shall be erected vertically, and the upper end shall be at least 250mm lower than the floor of the compartment.
4. The rear channel steel connected with the car floor should be in the same horizontal plane, and no steps should be left.
5. The door buckle at the bottom of the carriage should be made into a hook shape and buckle on the corresponding hole of the channel steel, and the protruding door buckle should not be made on the channel steel.
6. About 1000mm in the middle of the tailgate of the compartment is completely empty.
Post time: Nov-22-2022